An Italian History
Virtuemart Extensions

ALFA_DRAIN_en

 

Alfa DRAIN is the new line of trapped floor drains developed by  Plastica Alfa and intended for the building market (swimming pools, courtyards, sports facilities, etc.) with the usual attention to the quality and choice of materials. Alfa DRAIN includes three types of PP floor drains with VERTICAL connection in size 100x100 mm,150x150mm and 200x200mm. All these grant the disposal of rain and waste water in public areas (bathrooms, terraces, patios, basements, swimming pools, etc..), the dry trap prevents from smell; they also grant a quick installation, easy inspection and cleaning. The use of the polypropylene ensures: 1) Heat stability (the material used must withstand the temporary contact with domestic wastewater in a temperature range between 20 and 95 ° C; 2) Good resistance to acids and chemicals; 3) Optimum protection against scales thanks to the smooth walls, with "self-cleaning effect"; 4) Good workability resulting in time saving.
 

 

Shortly  the Alfa DRAIN range will be expanded with a series with horizontal spigot connections.
The Alfa DRAIN range is made in accordance with the UNI EN 1253 standard stating  the physical requirements for the floor drains construction; the standard  provides the height of water column for drain-traps, the capacity load, the discharge capacity, the temperature resistance and tightness.

 

 

[Brochure ALFA DRAIN [ITA/ING]

 
 

Hydrocyclone Alfaturbo

 

 

 

The Research and Development department of PLASTICA ALFA, always committed to the design, development and test of new products, has now finalized the new sand separator HYDROCYCLONE ALFA TURBO:  by using the centrifugal force, it is able to remove great quantity of sand, slags and solid particles from the water. More specifically, the water comes in from the upper part of the filter tangentially to the body and is accelerated by the rotating motion, the sand and solid particles in the water are pushed against the conical walls of the body from the centrifugal force settling in the bleed tank while clean water goes up again from the central part of the filter.motion of the water .

 

TECHICAL FEATURES
Max. working pressure recommended: 5 bar (72.5 psi)
Max Flow recommended: 1,7 lt/sec (26,9 gal/min)
Filtering capacity:  Particles: >70 micron - Specific weight:2,5 Kg/dm3
MATERIALS
Body and Cap: PAGF
Bleed tank: PPGF
O-ring: Nitrile Rubber (NBR Standard)
AVAILABLE CONNECTIONS
Threads: BSP (Gas) 1” - NPT ø 1”
 
 
TECHNICAL FEATURES
Max. working pressure recommended: 5 bar (72.5 psi)
Max Flow recommended: 30 m3/h (132 gal/min)
Filtering capacity:  Particles: >70 micron -  Specific weight: 2,5 Kg/dm3
MATERIALS
Body and Cap: PAGF - Bleed tank: PPGF
Clamp: PAGF
Stainless Steel Lock: SS AISI 304
Joint: PAGF
O-ring: Nitrile Rubber (NBR Standard)
Bolts: Galvanized Steel/Stainless Steel AISI 304 (upon request)
AVAILABLE CONNECTIONS
Grooved Fittings ALFARAPID : ø 2”
Threads: BSP (Gas) 2” - NPT  ø 2”
 
 
TECHNICAL FEATURES
Max. working pressure recommended: 5 bar (72.5 psi)
Max Flow recommended: 50 m3/h (132 gal/min)
Filtering capacity:  Particles: >70 micron -  Specific weight: 2,5 Kg/dm3
MATERIALS
Body and Cap: PAGF - Bleed tank: PPGF
Clamp: PAGF
Stainless Steel Lock: SS AISI 304
Joint: PAGF
O-ring: Nitrile Rubber (NBR Standard)
Bolts: Galvanized Steel/Stainless Steel AISI 304 (upon request)
AVAILABLE CONNECTIONS
Grooved Fittings ALFARAPID : ø 3”
Threads: BSP (Gas) 3” - NPT  ø 3”
 

 

 

 
 

Alfaidro Faser - PPR Multilayer Pipe

 

 
 
The Alfaidro Faser range includes multilayer PPR pipes reinforced by an intermediate layer of special fibers.
Suitable for hot and cold potable water, Alfaidro Faser can be joined with the whole range of Alfaidro fittings using the traditional welding techniques
 
 
APPLICATION
- Closed system
- Heating Systems
- Cooling systems 
- Systems for swimming pools
- Transport of chemicals
- Rainwater
- Irrigation
- Compressed air systems
- District heating systems
- Shipyards
- Food & Beverage industry
 
ADVANTAGES
The intermediate layer of the Alfaidro Faser pipe adds the following benefits to the traditional PPR monolayer pipes:
- reduced linear thermal expansion
- reduced quantity of pipe supports
- higher mechanical stability
- reduced weight
- increased water flow rate
 
In addition to the advantages related to the PPR, namely:
- Suitable for contact with drinking water
- High impact resistance
- Resistance to chemicals
- Thermal insulation
- Soundproofing 
- High stability at high temperatures
- Low pressure loss
- Corrosion resistance
- Resistance to stray currents
- Easy installation
REFERENCE STANDARDS
The Alfaidro Faser pipes are made in Italy and are produced according to the standards UNI EN ISO 15874 -1, -2, -3, -5, -7, EN 806-2, UNI EN ISO 21003-1, -2, -7, DIN 8077, DIN 8078, DIN 16962 , DIN 16837 and to D.M. 23/04/2009, D.M. 174 06/04/04 (ex D.M. 21/03/73) e Reg. UE n° 10/2011